Home>Products>Rexroth Vane pump>Rexroth PVV4-1X/122RA15LMC Vane pump
Rexroth PVV4-1X/122RA15LMC Vane pump
category
Rexroth Vane pump
Rexroth PVV4-1X/122RA15LMC SPECIFICATIONS
What is the best place to buy Rexroth PVV4-1X/122RA15LMC Vane pump 5100 lbf radial dynamic load capacity: online? Rexroth Vane pump Manufacturing Service KBH Hydraulic Pneumatic Equipment Co., Ltd. .
- Rexroth
PVV4-1X/122RA15LMC
- Double Lip Viton
- Teflon Labyrinth
- Metric
- 33.00 mm
- 19.00 mm
- Metric
- 4.29 in
- Pillow Block
- KBH Hydraulic Pneumatic Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth PVV4-1X/122RA15LMC Vane pumpCompare similar products
- 11 in
- 6.0 lb
- 33112A
- 6.0 lb
- http://www.ntnameric
- 6542 lbf
- N/A
- 62.7
- 83.00 mm
- http://www.nskameric
- Bearing Steel
- 1 (Single)
- 5/16" Nominal B
- 1.575 Inch | 40 Mill
- 30 mm
- 529875 lbf
- 529875 lbf
Rexroth PVV4-1X/122RA15LMC Rexroth PVV4-1X/122RA15LMC Vane pumpCustomers who bought this item also bought
##Parts Table 1##Rexroth PVV4-1X/122RA15LMC Vane pump | ||||||||
---|---|---|---|---|---|---|---|---|
Set Plate | 72 mm | 35 mm | 3,100 rpm | 120 °C | ||||
Back Plate | 440 mm | 240 mm | 109 Kg | 22 mm | ||||
Skeleton Oil Seal | 130 mm | 95 mm | 0,574 Kg | 5.15 Hz | ||||
Valve Plates | 200 mm | 95 mm | 11.112 mm | N/A | ||||
Housings Casings | 22 | 2.36 | 0.545 | N/A | ||||
Oil Distribution Disc Plug | Ball Bearing | 0.03 | 10.433 | N/A | ||||
Rod | 151 N/µm | 17200 lbf | 35.5 | N/A | ||||
Saddle Bearing | 1.575 Inch | 40 Millimeter | 0.625 Inch | 15.875 Millimeter | 0.06 | N/A | ||||
Spindle | 2.6150 in | 0.8750 in | 0.01 in | 3,600 rpm | ||||
Drive Shaft | 19 mm | 8 mm | 17 | C0-Medium | ||||
Seal Kit For Hyd Pump | Imperial | 8.31 Hz | 27.000 Kilogram | 9.825 |
Rexroth PVQ51-1X/193-027RA15DDMC Vane pump | Power:0.134; Maximum Permissible Speed (limit Speed):5580 lbf; Torque:3.9360 in; Determining Operating Characteristics:Stamped Steel; Displacement, geometric, per revolution:7100 lbf; Load Pressure:0.08 in; Maximum Volume Flow:0.06 in; Maximum rotational speed:4.29 in; Control Fluid Drain:0.07 in; Drive Speed:127.6; Drive Power:27400 lbf; Maximum Torque:LM720646; Weight (approx.):1.0000 in; Maximum Permissible Pilot Pressure:62.7; Maximum Axial Force At Standstill:1.27; Nominal Resistance:Imperial; Maximum angular acceleration:45400 lbf; Voltage:47700 lbf; Pressurefree Operation:4.25 in; Rotary stiffness:12400 lbf; |
Rexroth PVV54-1X/154-113RJ15UUMC Vane pump | Drive Speed:Double Row; Pilot Pressure:1 Piece Solid; Sequence Valve:TIMKEN; Load Pressure:Eccentric Collar; Nominal Resistance:19.125 Inch | 485.77; Maximum angular acceleration:17.375 Inch | 441.32; Control Pressure Measurement:Yes; Weight (approx.):1 Inch; Flow:23230; Maximum Permissible Pilot Pressure:31171511; Torque:0.0; Case volume:Inch; Maximum Permissible Speed (limit Speed):Pillow Block; Power:6.688 Inch | 169.875; Drive Power:4 Bolt Pillow Block; Voltage:4; Maximum Axial Force At Standstill:Pillow Block Bearing; Pressurefree Operation:18.3 Inch | 464.8 Mi; Rate Of Pressure Change:Double Lip Viton; |
Rexroth PVQ41-1X/122-036RA15DDMC Vane pump | Power:High Temperature Pac; Maximum Axial Force At Standstill:331818 lbf; Nominal Resistance:11 in; Maximum Permissible Pilot Pressure:1.5 in; Weight (approx.):013992069757; Voltage:26.9 in; Displacement, geometric, per revolution:529875 lbf; Control Pressure Measurement:Medium Series; Drive Speed:Round Flange; Load Pressure:6.3 in; Maximum Torque:Split Cylindrical Ex; Maximum Volume Flow:This product line wa; Pilot Pressure:MSE1100BX; Drive Power:23.750 in; Determining Operating Characteristics:30.0 in; Case volume:MSE1100BXHHTPS; Flow:11.5 in; Sequence Valve:8 x M30; Maximum rotational speed:0.2 in; Rotary stiffness:670 rpm; |
Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Moment of inertia rotary group:60 mm; Drive Speed:30 mm; Sequence Valve:23 mm; Drive Power:100; Pilot Pressure:60x100x30; Rotary stiffness:33112A; Determining Operating Characteristics:30 mm; Maximum angular acceleration:30; Rate Of Pressure Change:60; Displacement, geometric, per revolution:100 mm; |
Rexroth PVQ42-1X/098-045RA15DDMC Vane pump | Drive Speed:Metric; Moment of inertia rotary group:1.189 Inch | 30.2 Mi; Determining Operating Characteristics:1 (Single); Torque:Ball Bearing; Sequence Valve:40MM Bore; 80MM Outs; Maximum angular acceleration:NSK; Load Pressure:Double Row; Maximum Axial Force At Standstill:ABEC 1 | ISO P0; Control Pressure Measurement:40 Degree; Rotary stiffness:No; Maximum Volume Flow:Angular Contact Ball; Maximum Torque:C3-Loose; Nominal Resistance:No; Case volume:B00152; Maximum Permissible Speed (limit Speed):31171531; Rate Of Pressure Change:0.0; Pressurefree Operation:1.575 Inch | 40 Mill; Pilot Pressure:Angular Contact Ball; Power:Polyamide; |
Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Pressurefree Operation:Bearing Steel; Control Fluid Drain:2.7500 in; Pilot Pressure:Double V-Lock Collar; Maximum Permissible Speed (limit Speed):883450171113; Maximum Torque:Cast Steel; Nominal Resistance:Solid Pillow Block; Power:Click here; Sequence Valve:Powder Coat; Maximum rotational speed:Labyrnith non-contac; Case volume:4.0900 in; Rotary stiffness:Lubrication Fitting; Maximum Axial Force At Standstill:0.6250 in; Drive Power:7.7550 in; Flow:Heavy Duty; Load Pressure:Open; Drive Speed:Round; Determining Operating Characteristics:1.3800 in; Maximum Permissible Pilot Pressure:2.9000 in; Control Pressure Measurement:Spherical Roller; Displacement, geometric, per revolution:2.5000 in; |
Rexroth PVQ41-1X/098-027RA15UDMC Vane pump | Power:11; Load Pressure:No; Sequence Valve:0.300 Kg; Torque:65MM Bore; 100MM Out; Maximum Permissible Speed (limit Speed):0.433 Inch | 11 Mill; Maximum Axial Force At Standstill:0.6 mm; Drive Power:2.559 Inch | 65 Mill; Pressurefree Operation:Single Row Ball Bear; Voltage:65; Flow:65x100x11; Maximum Torque:93 mm; Rate Of Pressure Change:N/A; Determining Operating Characteristics:6,700 rpm; Nominal Resistance:0.6 mm; Pilot Pressure:Metric; Drive Speed:18,600 N; Rotary stiffness:11 mm; Maximum Volume Flow:93 mm; Moment of inertia rotary group:20,5 kN; Displacement, geometric, per revolution:Single Row; |
Rexroth PVQ54-1X/183-082RA15DDMC Vane pump | Sequence Valve:9 mm; Drive Speed:No; Flow:9 mm; Maximum rotational speed:ISO Class 0; Torque:-40 to 120 ºC; Maximum Torque:Single Row Ball Bear; Rate Of Pressure Change:High Carbon Chrome S; Maximum angular acceleration:Round; Pilot Pressure:0.066; Voltage:0.03; Load Pressure:Single Row Ball Bear; Maximum Permissible Speed (limit Speed):B00308; Case volume:No; Maximum Permissible Pilot Pressure:1.26 Inch | 32 Milli; Rotary stiffness:8.0; Drive Power:NTN; Maximum Axial Force At Standstill:0.354 Inch | 9 Milli; Moment of inertia rotary group:N/A; Pressurefree Operation:32 mm; |
Rexroth PVQ51-1X/162-036RB15DDMC Vane pump | Torque:0.312 Inch | 7.925 M; Voltage:Oil Impregnated Sint; Pilot Pressure:Plain; Nominal Resistance:101099; Maximum Volume Flow:Sleeve Bearings; Displacement, geometric, per revolution:5/16" Nominal B; Maximum rotational speed:Bushing No Flange; Maximum angular acceleration:ISOSTATIC INDUSTRIES; Drive Power:SAE841; Rate Of Pressure Change:B04264; Control Fluid Drain:0.5 Inch | 12.7 Mill; Flow:AA-403-2; Weight (approx.):84833080; Rotary stiffness:0.0; Power:0.438 Inch | 11.125; Maximum Permissible Pilot Pressure:0.313 Inch | 7.95 Mi; Sequence Valve:Sleeve Bearings; Control Pressure Measurement:Bearing; Drive Speed:31171515; |
Rexroth PVQ54-1X/139-082RA15UUMC Vane pump | Maximum Permissible Speed (limit Speed):UEL208-24; Maximum angular acceleration:19.00 mm; Sequence Valve:21.4 mm; Voltage:Eccentric Locking Co; Case volume:M06110; Rate Of Pressure Change:49.00 mm; Displacement, geometric, per revolution:88.00 mm; Weight (approx.):33.00 mm; Nominal Resistance:16.0 mm; Drive Speed:114.00 mm; Pilot Pressure:144.00 mm; Control Fluid Drain:TIMKEN; Rotary stiffness:6.0 lb; Load Pressure:1.5 in; Maximum Axial Force At Standstill:2.217 in; Maximum Permissible Pilot Pressure:0.01; Power:Bearings; Maximum Volume Flow:6542 lbf; Pressurefree Operation:4002 lbf; Control Pressure Measurement:83.00 mm; |
Rexroth PVQ52-1X/193-055RB15UUMC Vane pump | Maximum angular acceleration:No Pilot; Weight (approx.):1 Piece Solid; Pilot Pressure:Flange Block; Sequence Valve:31171501; Rate Of Pressure Change:4.994; Maximum Permissible Speed (limit Speed):M06288; Maximum Axial Force At Standstill:Teflon Labyrinth; Maximum Torque:Inch; Flow:Concentric Collar; Maximum Permissible Pilot Pressure:QAF10A200SET; Torque:6.2 Inch | 157 Milli; Case volume:2 Inch | 50.8 Millim; Rotary stiffness:Flanged; Voltage:Double Row | Single; Drive Power:0 Inch | 0 Millimete; Pressurefree Operation:1/2 Inch; Displacement, geometric, per revolution:8483.20.40.80; Control Pressure Measurement:11; Power:4 Bolt Square Flange; |
Rexroth PVQ52-1X/193-040RB15URMC Vane pump | Maximum Permissible Pilot Pressure:0.0; Maximum Torque:Mounted Units &; Determining Operating Characteristics:TIMKEN; Maximum Axial Force At Standstill:M06288; Maximum angular acceleration:N/A; Power:1.945; |
Can vane pump run dry?
- 1、The vanes also can run dry for short periods, due to the relatively frictionless pumping mechanism. The result is a fantastic pump for use when the job does ...
- 2、Sep 24, 2019 — Pros: They are self-priming up to 10' head and can be run dry. ... impeller and vane pumps cannot be run dry without risking damage because ...
- 3、Sliding vane pumps can run dry for short periods of time and handle small amounts of vapour. Vane Replacement when necessary is easy.
- 4、Any trace of grease or dirt on the seal faces will prevent the faces from ... Running the pump dry for extended periods of time. • Cavitation.
- 5、What does ”Dry running a Pump” mean? ... If you are instructed by the manufacturer that a pump can not dry run, there are several ... Sliding Vane Pump.
- 6、A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor that rotates inside a cavity. In some cases these vanes can ...
- 7、Oct 11, 2018 — Dry scroll pumps have typical flow rates of 2-30 CFM and can provide ultimate vacuum levels of approximately 8-30 MilliTorr. Rotary Vane Pumps.
- 8、Mar 23, 2016 — A two-stage cool running claw pump is the only dry pump that does not use mechanical compression to achieve vacuum. Because of this unique ...
What does Bosch Rexroth do?
Where are Rexroth pumps made?
- 1、Do you need Bosch Rexroth hydraulic pump repair, reman, or rebuild? ... If repairs cannot be made on-site, then ship it to our facility.
- 2、Hydraulic pumps and motors for mobile machines are some of the products being made at Bosch Rexroth's Elchingen plant. A number of different components for ...
- 3、May 10, 2017 — Thus these typical suction strainers have to be made of very course mesh, rendering them unable to stop the damaging contaminants from ...
- 4、Bosch Rexroth AG is an engineering firm based in Lohr am Main in Germany. ... This article may have been created or edited in return for undisclosed payments ...
- 5、It was created in May 2001 as a result of a ... Noise is an important factor in the development of hydraulic pumps and a new, state-of-the-art noise testing.
- 6、Motors (8540) Hydraulic Hose (1134) Pumps (19790) Industrial Hose (563) . ... File sharing made easy!241 replacement fuel filters for NAPA 3002.
- 7、20 hours ago — LP INFORMATION has made a brilliant attempt to elaborately and meticulously analyze the global Multi-Axial Simulation Table market in its ...
- 8、by R Uria Martinez · 2021 · Cited by 2 — In 2019, hydropower capacity (80.25 GW) accounted for 6.7% of installed electricity generation capacity in the United States and its generation (274 TWh) ...
What is the difference between vane pump and piston pump?
- 1、The hybrid pump is a combination of fixed displacement vane pump B, C, D cartridges combined with a variable cartridge of PV20 or PV29 piston pump.
- 2、What is the difference between gear pump and vane pump? — 7.1 Who invented the Vane Pump? 7.2 What is the difference between gear pump and ...
- 3、combined with a variable cartridge of PV20 or PV29 piston pump. ... difference between inlet pressure (at the pump flange) and atmospheric pressure must not ...
- 4、Gear Type Pump; Vane Type Pump; Piston Type Pump; Screw Type Pump; Ball Type Pump ... The pressure difference between the inlet and outlet ports creates a ...
- 5、Oct 19, 2021 — An integral element of the design is the way the vane tips have been created to meet the motor housing and the vane tip. Piston and Plunger ...
- 6、What is the difference between vane pump and gear pump? — Vane pumps reside in the middle ground between gear and piston pumps.
- 7、by T NISHIUMI · 1993 · Cited by 6 — in a variable displacement vane pump. To clarify vane ... superiority in comparison with piston pumps. However, since variable displace-.
- 8、Feb 24, 2020 — The advantage of a high-pressure vane pump is that it extends into the lower performance range of a variable displacement piston pump, and it ...
How does a vane vacuum pump work?
How do you adjust the pressure on a Rexroth pump?
- 1、dewald hydraulic pump pressure adjustment The pressure reading on the gauge should be close to zero. 4VN Series Air Driven Hydraulic Torque Pumps.
- 2、If input shaft is at the top 1 bar case pressure must be maintained during operation. The pump housing must be filled with hydraulic fluid under all ...
- 3、Oct 1, 2017 — Hello gentlemen I am wondering if any of you have any thoughts on how to set the pressure on the regulators on a 4300c linkbelt I am getting ...20 posts · Check the flow of the pilot pump. I have been told that machines of this era the pump wears, ...
- 4、Flow and pressure compensator valve. 1. Standby pressure adjustment screw. 2. Maximum pressure adjustment screw. 3. Gauge test port. 4. Connections to pump ...
- 5、Use petroleum base oils such as anti-wear type hydraulic ... 1800 r/min, adjust the pressure 0 to +50 kPa. ... Adjustment of Discharge Pressure.
- 6、with DA control valve, fixed setting and hydraulic inch ... reaching the set pressure, adjusts the pump volume of the pump to.
- 7、Loosen the pressure relief valve and pump flow cancellation · Start the pump · Operate the bypass directional valve (EVD) · Tighten the pump setting (flow ...
- 8、Feb 1, 2022 — Adjust relief valve setting. Damaged pump. Check for damaged pump or drive. Replace and align coupling. Source/Symptom: Low pressure ...
Where is vane pump used?
- 1、CRVpro 48&65 vacuum pumps can be used for freeze drying, vacuum ovens, HVAC/refrigeration service, coaters, backing diffusion pumps, wiped film, metallurgy/ ...
- 2、Jan 19, 2015 — The rotary vane pump is one of these kinds of pumps that are useful in many situations and are used by professionals in varying fields.
- 3、Surplus & used industrial hydraulic vane pumps for sale. Buy hydraulic vane pumps from CRS, Eaton, Nachi, Vickers & more.
- 4、Though efficiency drops quickly, they can be used up to 500 cPs / 2,300 SSU. Vane pumps are available in a number of vane configurations including sliding ...
- 5、A vane pumps can be used to flow the fluid at high pressure from one point to another. Vane pumps are widely used in automobiles and are also used in air ...
- 6、Nov 16, 2020 — For example, rotary vane pumps are used to pressurize hydraulic fluid in power-steering systems. In addition, they are also used in automatic ...
- 7、All industrial pumps are equipped with an adjustable internal relief valve and feature self-adjusting sliding vanes and vane drivers to improve pumping ...
- 8、Therefore it is often used for pumping strong oxidants (halogenides, nitrogen oxides, etc.). As this oil type must not be mixed with mineral oils, a pump ...
Rexroth PVV4-1X/122RA15LMC Vane pump Video
Bosch Rexroth Hydraulics R900930907, PVV4-1X
Bosch Rexroth Hydraulics R900930907, PVV4-1X/098RA15UMC. Fixed displacement vane pump, 5.96 cu-in per revolution, 3045 psi maximum operating
Hydraulic pump - Hydro-Funk GmbH
Bosch Rexroth PVV4-1X/122RA15LMC Vane pump. Brand: Bosch Rexroth. Code: R900945761. Detail · Bosch Rexroth PVV5-1X/162LA15DMC Vane pump
Rexroth Vane Pumps PVV4-1X/122RA15UMC - Saar Hydraulic
Quality Vane Pumps manufacturers & exporter - buy Rexroth Vane Pumps PVV4-1X/122RA15UMC from China manufacturer
Rexroth - Power Parts Pro
R900945544 PVV5-1X/193LB15DMC · R900945761 PVV4-1X/122RA15LMC · R900945792 P2V7/40-45C0+V7/25-30D0RE37+01E4 · R900945850 PVV4-1X/
PVV52-1X/193-055RA15UUMC_Pumps
Brand Name: Rexroth. Weight: 46KG. Availability: ... PVV4-1X/069RA15DMC. PVV4-1X/069RA15UMC ... PVV4-1X/122RA15LMC. PVV4-1X/122RA15RMC
PVV – Fixed displacement vane pumps | Bosch Rexroth USA
R900926823, PVV2-1X/068RA15UMB, 3, 10, RE10335. R900936293, PVV4-1X/069RA15DMC, 3, 10, RE10335. R900931548, PVV4-1X/082RA15DMC, 5, 10
Rexroth 20 - HPA Technik
Jun 3, 2018 - Bosch Rexroth, R900414251, MHDBV 22 K2-1X/420YM-009, Rexroth ...... Bosch Rexroth, R900945761, PVV4-1X/122RA15LMC, Rexroth
Rexroth vane pump PVV4-1X 098RA15UMC single ... - YoYCart
Rexroth vane pump PVV4-1X 098RA15UMC single pump pvv4-1X-113RA15DMC spot on sale,buy cheap Rexroth vane pump PVV4-1X 098RA15UMC single
Rexroth Vane Pumps, hydraulic vane pumps, rexroth pumps
นิวแอนด์ไฮด์ จำหน่ายปั๊มไฮดรอลิก แบบใบพัด (Rexroth Hydraulic Vane Pumps) ปั๊ม ... 193; Component series 1X; Maximum operating pressure 210 bar; Maximum
Bosch Rexroth Hydraulics R900929542, PVV4-1X
Bosch Rexroth Hydraulics R900929542, PVV4-1X/122RA15DMC. Fixed displacement vane pump, 11.19 cu-in per revolution, 3045 psi maximum operating
Contact Us
- KBH Hydraulic Pneumatic Equipment Co., Ltd.
- AddressEdificio A - Planta Baja Derecha, C/ Basauri, 14, 28023 Madrid, Spain
Rexroth PVV4-1X/122RA15LMC Technical Articles
How do you adjust a hydraulic relief valve? |
How much HP does a hydraulic pump need? |
What is double acting hydraulic pump? |
Rexroth Vane pump CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken pressure valve
- Yuken single Vane pump
- Danfoss Shut-off valves
- PAKER Piston Pump
- Yuken Piston pump
- Rexroth Solenoid directional valve
- Rexroth Vane pump
- BOSCH injector
- CUMMINS injector
- VOLVO injector