English- Home
- Stock Categories
- Technical Articles
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
Home>Products>Yuken single Vane pump>Yuken PV2R4-153-F-LAA-4222 single Vane pump
Yuken PV2R4-153-F-LAA-4222 single Vane pump
category
Yuken single Vane pump
Yuken PV2R4-153-F-LAA-4222 SPECIFICATIONS
Browse Yuken PV2R4-153-F-LAA-4222 single Vane pump Categories in the Manufacturers Online 15MM Nominal Bore; 1 Long Description Free. including Yuken single Vane pump. KBH Hydraulic Pneumatic Equipment Co., Ltd. 0.591 Inch | 15 Mill Nominal Bore
- Yuken
PV2R4-153-F-LAA-4222
- 0.688 lb
- 37 mm
- Flanged
- 4.375 Inch | 111.13
- 8482.10.50.28
- 5.118 Inch | 130 Mil
- B00234
- 6017 C3 BN
-
KBH Hydraulic Pneumatic Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Details ofYuken PV2R4-153-F-LAA-4222 single Vane pump
- Static 8000 / D
- 420
- CX118
- No Pilot
- Oilite®, Synthet
- Ball
- M06288
- 2.626
- 3-7/8 in
- 8482.10.50.28
- 30 mm
- 15 °
- 1/4 in
- B04336
- http://www.amibearin
- 0.0
- 5.118 Inch | 130 Mil
Yuken PV2R4-153-F-LAA-4222 Yuken PV2R4-153-F-LAA-4222 single Vane pumpSpecification
#Yuken PV2R4-153-F-LAA-4222 single Vane pump#Parts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assemblies | 22,5 | 20 | 0.6 mm | 25 ° / Angle | ||||
| Snap Ring | 55 mm | 72 mm | 22217 | 6500 r/min | ||||
| Housings Casings | 75 mm | 105 mm | 96,8 kN | 0,91 Kg | ||||
| Skeleton Oil Seal | 95 mm | 145 mm | 40 kN | 2,55 Kg | ||||
| Gear Pump | 45 mm | 35 | 31.85 kN | 2.07 kg | ||||
| Disc Springs | 41.28 mm | 410 | 31.85 kN | 2.03 kg | ||||
| Valve Plate | 2.938 Inch | 74.625 Millimeter | 4.18 Inch | 106.172 Millimeter | 6500 r/min | 12.712 | ||||
| Piston Shoe | 8 Nm | -20 °C | 41.28 mm | - | ||||
| Spindle | 0,91 Kg | 11.5 Nm | 1 mm | - | ||||
| Swash Plate | 2.6250 in | 3.5000 in | 11.5 Nm | 60 ° | ||||
| Rotor | - | 200 | 3.75 Inch | 95.25 Millimeter | 15mm | ||||
| Cylinder | 62 mm | 95 mm | 22 mm | -20 °C | ||||
| Valve Plates | 1.5 mm | Click here | 1 Piece Solid | EX209G2L4 | ||||
| Yuken PV2R1-31-L-RAA-4222 single Vane pump | Maximum angular acceleration:N/A; Maximum Permissible Pilot Pressure:SKF; Rate Of Pressure Change:0.0; Drive Speed:713649300; Displacement, geometric, per revolution:Bearings; Drive Power:B00234; Determining Operating Characteristics:0.661; Maximum Torque:VKBA 1460; Maximum Permissible Speed (limit Speed):CX118; Sequence Valve:5024; |
| Yuken PV2R1-19-L-RAA-4222 single Vane pump | Determining Operating Characteristics:4.375 Inch | 111.125; Weight (approx.):Tapered; Rotary stiffness:31171516; Power:TIMKEN; Pilot Pressure:Double Row; Control Fluid Drain:B04336; Maximum Volume Flow:0.005; Control Pressure Measurement:H924045; Voltage:0 Inch | 0 Millimete; Maximum Permissible Pilot Pressure:4.563 Inch | 115.9 M; Maximum rotational speed:Assembly; Load Pressure:Tapered Roller Beari; Pressurefree Operation:17.61; Moment of inertia rotary group:Inch; Case volume:8482.20.00.00; Maximum Torque:Bearing; Sequence Valve:8.438 Inch | 214.325; Nominal Resistance:Tapered Roller Beari; Maximum Axial Force At Standstill:2 Single Cone | 1 Do; |
| Yuken PV2R1-17-L-RAA-4222 single Vane pump | Drive Power:250,000 mm; Determining Operating Characteristics:46,000 mm; Pressurefree Operation:250x349.500x46; Case volume:46,000 mm; Maximum Volume Flow:349,500; Maximum rotational speed:349,500 mm; Rate Of Pressure Change:250,000; Maximum angular acceleration:SC5003; Power:46,000; |
| Yuken PV2R1-25-F-RAA-4222 single Vane pump | Weight (approx.):N/A; Maximum Permissible Speed (limit Speed):SKF; Drive Power:0.0; Maximum Permissible Pilot Pressure:713649300; Load Pressure:Bearings; Displacement, geometric, per revolution:B00234; Maximum Axial Force At Standstill:0.661; Maximum Torque:VKBA 1460; Sequence Valve:CX118; Flow:5024; |
| Yuken PV2R1-12-L-RAA-4222 single Vane pump | Case volume:1/2 Inch; Maximum Permissible Pilot Pressure:UC210-30; Maximum rotational speed:4.375 Inch | 111.13; Control Pressure Measurement:4; Torque:Inch; Determining Operating Characteristics:Contact Seal; Power:Flange Block Bearing; Maximum Volume Flow:8483.20.40.40; Drive Power:Set Screw; Maximum Torque:Single Row | Spheric; Displacement, geometric, per revolution:Bearing; Maximum Permissible Speed (limit Speed):5.51; Weight (approx.):0.0; Pressurefree Operation:No Pilot; Control Fluid Drain:31171501; Maximum angular acceleration:2.626; Drive Speed:Flanged; Moment of inertia rotary group:Ball Bearing; Rate Of Pressure Change:Cast Iron; |
| Yuken PV2R1-23-F-RAA-4222 single Vane pump | Displacement, geometric, per revolution:N/A; Power:SKF; Case volume:0.0; Sequence Valve:713649300; Maximum angular acceleration:Bearings; Pilot Pressure:B00234; Moment of inertia rotary group:0.661; Control Pressure Measurement:VKBA 1460; Nominal Resistance:CX118; Maximum Torque:5024; |
| Yuken PV2R1-23-L-RAA-4222 single Vane pump | Control Fluid Drain:Cylindrical Bore; Maximum angular acceleration:1.969 Inch | 50 Mill; Power:7310B; Flow:Bearing; Maximum Volume Flow:100 mm; Maximum Permissible Speed (limit Speed):2 mm; Voltage:No; Load Pressure:1 mm; Rotary stiffness:Ball Bearing; Control Pressure Measurement:0.0; Moment of inertia rotary group:8482.10.50.28; Weight (approx.):50MM Bore; 110MM Out; Pilot Pressure:No; Drive Speed:N/A; Maximum rotational speed:B00308; Maximum Axial Force At Standstill:1 mm; Maximum Torque:2 mm; Sequence Valve:2 mm; Determining Operating Characteristics:110 mm; Torque:Angular Contact Ball; |
| Yuken PV2R1-17-F-RAA-4222 single Vane pump | Maximum Axial Force At Standstill:0.028; Maximum rotational speed:SCHAEFFLER GROUP; Weight (approx.):B04144; Maximum Volume Flow:Bearings; Case volume:0.0; Moment of inertia rotary group:N/A; |
| Yuken PV2R1-31-F-RAA-4222 single Vane pump | Sequence Valve:N/A; Rotary stiffness:SKF; Drive Power:0.0; Rate Of Pressure Change:713649300; Pilot Pressure:Bearings; Maximum Permissible Pilot Pressure:B00234; Maximum Torque:0.661; Control Pressure Measurement:VKBA 1460; Voltage:CX118; Control Fluid Drain:5024; |
| Yuken PV2R1-14-L-RAA-4222 single Vane pump | Maximum Axial Force At Standstill:Uncoated; Power:053893333496; Maximum Torque:49400 lbf; Pilot Pressure:55000; Load Pressure:-65 to +250 &de; Weight (approx.):2.5000 in; Drive Speed:55433D, 55444D; Maximum Permissible Speed (limit Speed):Chrome Steel; Rate Of Pressure Change:1.9675 in; |
| Yuken PV2R1-25-L-RAA-4222 single Vane pump | Drive Power:420 mm; Maximum Torque:280 mm; Voltage:33,5 Kg; Control Pressure Measurement:245 mm; Maximum rotational speed:65 mm; Pressurefree Operation:65; Control Fluid Drain:420; Pilot Pressure:65 mm; Load Pressure:QJ 1056; Rotary stiffness:553 kN; Maximum Permissible Pilot Pressure:280x420x65; Maximum Permissible Speed (limit Speed):280; |
| Yuken PV2R1-14-F-RAA-4222 single Vane pump | Case volume:250,000 mm; Maximum Volume Flow:46,000 mm; Rotary stiffness:250x349.500x46; Load Pressure:46,000 mm; Control Fluid Drain:349,500; Voltage:349,500 mm; Weight (approx.):250,000; Nominal Resistance:SC5003; Control Pressure Measurement:46,000; |
Yuken PV2R4-153-F-LAA-4222 single Vane pump Video
What is a vane pump and where is it usually located?
- 1、There are several variations of vane pumps commonly available, ... If the rotor was placed directly in the centre of the cam ring, the pump would have no ...
- 2、It is usually used in the same manner as a centrifugal fuel pump on larger aircraft, except it is located downstream of the fuel tank outlets.
- 3、A vane pump is a type of rotary positive displacement pump. It consists of vanes mounted radially on a cylindrical rotor, which is eccentrically located in the ...
- 4、The consequences of fluid deterioration always lead to a low performing pump or to a premature breakdown. We recommend for all grease lubricants to be based ...
- 5、Dec 31, 2020 — Rotary vane vacuum pumps are dependable and durable. After many years of service, many pumps are often neglected and unused. We.
- 6、A vane pump is an oil-sealed positive displacement pump that use a rotating rotor consisting of vanes. The principle of the vane pump is to move fluid through ...
- 7、by W Fiebig · 2021 · Cited by 2 — The new design of the vane pump integrated with the electric motor [1] is based on the kinematic inversion and assumes that the rotor of the ...
- 8、In the rotor's slot the sliding vanes are placed. The shape of this equipment is rectangular and spring is used to attach it with the slots. Spring is generally ...
How does a vane water pump work?
- 1、Get a better understanding of how centrifugal water pumps work. ... As the moving pump part (impeller, vane, piston diaphragm,etc.) ...
- 2、How Vane Pumps Work — The rotor is sealed into the cam by two sideplates. Vanes or blades fit within the slots of the impeller. As the rotor rotates (yellow ...
- 3、The user must authorise the operating personnel to do the work that has to be done. The personnel must have read and understood the operation manual completely ...
- 4、Water, specifically, does extensive damage to pump components when the pump ... The vane pump is a device that works on the principle of positive ...
- 5、These pumps have a number of vanes that are free to slide into or out of slots in the pump rotor. When the pump driver turns the ... How Do Vane Pumps Work?
- 6、How Does a Hydraulic Vane Pump Work? While various vane pump ... Two side plates seal the rotor into the cam as the vanes fit between the impeller's slots.
- 7、Vanes are allowed to slide into and out of the rotor and seal on all edges, creating vane chambers that do the pumping work. In the suction side of the pump ...
- 8、Gas transfer types of vacuum pumps work by mechanically removing gases through ... oxygen, water vapor, and trace gases such as neon, helium, and hydrogen.
What is the difference between vane pump and gear pump?
- 1、VPV 32/25, Combination pump, S.A.E. 'F' gear pump, ... VPV pumps can be operated over the entire speed range as defined in the specifications pages, independent of the ... Whisper™ VPV Vane Pump Catalog | Comparison of sound levels
- 2、Items 1 - 10 of 52 — A gear water pump can handle fluids that are too viscous for a centrifugal pump. ... The difference is shown in the picture below: Essentially a Geroler' ... a range of hydraulic pumps, vane pumps, gear pumps, piston pumps,
- 3、At Pump Solutions we have a range of rotary vane pumps for automotive, ... They normally produce higher efficiencies compared to gear pumps and are generally ... provides an approximate constant flow at fixed speed, despite changes in the
- 4、Jul 17, 2017 — Our helical gear pump has a natural action that pushes the gears against ... versus the one of the most common 3” vane pumps in the market
- 5、Good pumping efficiency and gas ballast in the low 10-2 mbar region. Forced Oil Circulation. • The dedicated oil circulation gear pump ensures efficient and
- 6、Internal Leakage at Tips in a Gear Pump ... Not all pumps have both types, for example, vane pumps do not have tip clearance because the ... with minimal distortion due to fluid absorption, temperature differences, residual stresses and creep
- 7、Jan 15, 2021 — While rotodynamic pumps generate relatively smooth flow, positive displacement pumps such as piston pumps, gear pumps and sliding vane pumps generate ... There are typically two measuring tubes in a Coriolis meter, which are ... figure 3) for comparison, with pressure on the pump outlet and in the flow
- 8、can successfully participate in the ... motor in the central supply, to- ... Figure 4: Overall efficiency of the T7B vane pump and internal gear pump of 32 ccm and 50 ccm ... Table 1: Comparison of rotation speeds in pressure-holding operation
What are vane pumps used for?
- 1、Learn about Rotary Vane Vacuum Pumps, their uses, benefits, components and operating principles for both dry and oil lubricated pumps
- 2、Jan 17, 2019 — A specific template for vane pumps was used. In the variable chambers, the cells were anchored to the vanes and to the outer diameter of the
- 3、What Kinds of Applications are Rotary Vane Pumps Used In? · Pick and place · Vacuum infusion of composites · Paper and Plastic Packaging · Food Packaging and
- 4、They are typically used for viscous fluids which are lubricating such as oils, petroleum's, diesel, animal oils/blood, and fuel oil. They can also handle non-
- 5、If springs or other means are used to hold vanes out against the ring, efficient operation at speeds of 100 to 200 rpm is possible. Vane pumps maintain their high
- 6、MOCAREEL Rotary Vane Pumps stand out for their high performance: the maximum flow rate is 6 litres/minute at 1450 rpm for maximum allowed pressure of 16
- 7、fixed displacement high pressure hydraulic vane pumps. Two opposed pumping chambers formed by the elliptical profile of the cam within the cartridge cancel out
- 8、Vane pumps are used for liquid transfer applications ranging from chemicals to liquefied gases. Vanes extend from slots in the rotor, sweeping liquid through a
What are the components of the vane pump?
- 1、The combination of a chemical duty diaphragm pump with a rotary vane pump was developed with strong ... The RVP-Trolley includes the following components:
- 2、Nov 17, 2021 — Rotary pumps consist of an input point, the pumping element (lobes, screws, gears, or vanes), and an output point. Fluid enters the pump ...
- 3、Eaton Vickers Vane Pump Cartridge Kits and Seal Kits are designed to fit Eaton's range of V10, V20 and VQ Intra-Vane Pumps. Shop online now!V10: 923548V20: 922733VQ (20VQ): 497123VQ (45VQ): 920025
- 4、Components of the pumping cartridge are an elliptical cam ring, a slotted rotor splined to the drive shaft and twelve vanes fitted to the rotor slots.14 pages
- 5、Dec 12, 2018 — After the liquid is collected in this space, the movement of the pumping elements transports it to the discharge port. In general, this method ...
- 6、Ensuring constant, optimal system pressure and smooth interaction between the transmission components. The regulated VPG vane pump supplies exactly the ...
- 7、Oct 7, 2015 — Considering a vane pump for your application? ... Complex housing and many parts; Not suitable for high pressure or high viscosity ...
- 8、Our vane pump units are available in single pump, double pump, triple pump, drive train pump and vane motor. Category: Vane Pumps ...
What are the characteristics of vane pumps?
- 1、Oct 7, 2015 — VANE PUMP OVERVIEW. Vane pumps are well known for their dry priming, ease of maintenance, good suction characteristics, and are a popular choice ...
- 2、... characteristics of vane pumps in the presence of a ''scale effect'' ... of tests required to obtain the cavitation characteristics for several fixed ...
- 3、A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor ... and good suction characteristics over the life of the pump.
- 4、Oct 22, 2017 — ... for their dry priming, ease of maintenance, and good suction characteristics. ... The vane pumps generally consist of a rotor, vanes, ...
- 5、Vane pumps are noted for their dry priming, ease of maintenance, and good suction characteristics over the life of the pump. Moreover, vanes can usually handle.
- 6、Dynamic characteristics measuring layout. 5. Characteristics PV7‒../06-10 ... 01 Vane pump, direct controlled, maximum operating pressure 100 bar. PV7.
- 7、Because of its composition, therefore, shale oil has different handling characteristics than traditional crude oil as it makes its way through the refining ...4 pages
- 8、by IS Cho · 2015 · Cited by 8 — In an oil hydraulic vane pump for power steering systems, the force acting on the vane generally consists of oil hydraulic, inertial and ...
What is the difference between vane pump and piston pump?
- 1、Continental Hydraulics PowerFlow™ PVR Vane Pumps deliver the rugged, ... Hydraulic pulsation with only a rotary motion and no linear reciprocating motion ...
- 2、Vane pumps are positive-displacement units that generate a pumping action by causing vanes to track along a ring. The pumping mechanism of a vane pump consists ...
- 3、Jun 29, 2018 — With a fixed displacement piston pump, the swash plate is nonadjustable. ... Vane pumps were, at one time, commonly used on utility vehicles ...
- 4、Gear Type Pump; Vane Type Pump; Piston Type Pump; Screw Type Pump; Ball Type Pump ... The pressure difference between the inlet and outlet ports creates a ...
- 5、MCQs: What is the difference between vane pump and radial piston pump? - Mechanical Engineering Questions - Hydraulics & Pneumatics Test Questions.
- 6、by M El Ashmawy · 2009 · Cited by 12 — design with no pressure difference between the two sides of the vane is proposed. Keywords: vane pump, friction, PVD, hydraulic, power steering, coating.
- 7、by G Marinaro · 2020 — In an unbalanced variable displacement vane pump, an individual ... required eccentric position actuated by a piston hydraulically controlled by a pressure ...
- 8、Jan 1, 2012 — As the piston extends, the partial vacuum created in the pump chamber ... In vane pumps, a number of vanes slide in slots in a rotor which ...
Contact Us
- KBH Hydraulic Pneumatic Equipment Co., Ltd.
- AddressEdificio A - Planta Baja Derecha, C/ Basauri, 14, 28023 Madrid, Spain
Yuken PV2R4-153-F-LAA-4222 Technical Articles
| How do you adjust a hydraulic relief valve? |
| How much HP does a hydraulic pump need? |
| What is double acting hydraulic pump? |
Yuken single Vane pump CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken pressure valve
- Yuken single Vane pump
- Danfoss Shut-off valves
- PAKER Piston Pump
- Yuken Piston pump
- Rexroth Solenoid directional valve
- Rexroth Vane pump
- BOSCH injector
- CUMMINS injector
- VOLVO injector
Yuken PV2R1-31-F-RAA-4222 single Vane pump
Yuken PV2R1-31-L-RAA-4222 single Vane pump
Yuken PV2R1-25-F-RAA-4222 single Vane pump
Yuken PV2R1-25-L-RAA-4222 single Vane pump
Yuken PV2R1-23-F-RAA-4222 single Vane pump