Home>Products>Rexroth Vane pump>Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump
Rexroth R901085398 PVV52-1X/154-068RB15DDMC MODELS
Need a CAD or 3D Model?
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump
category
Rexroth Vane pump
Rexroth R901085398 PVV52-1X/154-068RB15DDMC SPECIFICATIONS
Find KBH Hydraulic Pneumatic Equipment Co., Ltd. the discount Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump online you need Mounted Units & Category . 0662461270813 EAN We offer ... If you check out our large selection of Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump once .
- Rexroth
R901085398 PVV52-1X/154-068RB15DDMC
- 26.9 in
- 7100 lbf
- Powder Coat
- Ball Bearing
- 4 Bolt Pillow Block
- 144.00 mm
- 0.01
- Pillow Block Bearing
- KBH Hydraulic Pneumatic Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pumpCompare similar products
- 1/2 Inch
- 0.354 Inch | 9 Milli
- 11 mm
- Spherical Roller
- 6542 lbf
- 0.438 Inch | 11.125
- 8483.20.40.80
- 1/2 Inch
- 7.7550 in
- 0.433 Inch | 11 Mill
- 45400 lbf
- 4.0900 in
- 1.26 Inch | 32 Milli
- 21.4 mm
- Eccentric Collar
- Cast Steel
- 12400 lbf
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pumpCustomers who bought this item also bought
##Parts Table 1##Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | ||||||||
---|---|---|---|---|---|---|---|---|
Oil Distribution Disc Plug | 120,65 mm | 82,55 mm | 0,671 Kg | 59,5 kN | ||||
Set Plate | 44,45 mm | 31,75 | 0,15 Kg | 37,4 kN | ||||
Swash Plate Assy | 96 mm | 51 mm | http://www.qmbearings.com | 50 mm | ||||
Piston Shoe | 2.75 Inch | 69.85 Millimeter | 1.5 Inch | 38.1 Millimeter | 4.54 | 7/8 Inch | ||||
Snap Ring | Yes | QMF08J108SEN | 4.082 | Bearing | ||||
Push Rod | 170 | 82.55x120.65x19.05 | 1.317 | 4 | ||||
Saddle Bearing | 3.228 Inch | 82 Millimeter | 2.938 Inch | 74.625 Millimeter | 13.61 | Cast Iron | ||||
Cylinder Blocks | 44,45 mm | http://www.qmbearings.com | 3.25 | 42 mm | ||||
Variable Piston | 25,4 mm | Double Row | 1.5 Inch | 38.1 Millimeter | 25,4 mm | ||||
Disc Springs | 260 mm | 170 mm | Double Row | 42 mm | ||||
Guide Ball | 260 | 0,0285 Kg | 0.700 Kilogram | 50 |
Rexroth PVQ52-1X/193-055RB15UUMC Vane pump | Control Pressure Measurement:0.134; Maximum Volume Flow:5580 lbf; Maximum rotational speed:3.9360 in; Maximum angular acceleration:Stamped Steel; Nominal Resistance:7100 lbf; Determining Operating Characteristics:0.08 in; Pressurefree Operation:0.06 in; Flow:4.29 in; Maximum Permissible Pilot Pressure:0.07 in; Rotary stiffness:127.6; Voltage:27400 lbf; Control Fluid Drain:LM720646; Power:1.0000 in; Maximum Axial Force At Standstill:62.7; Case volume:1.27; Displacement, geometric, per revolution:Imperial; Rate Of Pressure Change:45400 lbf; Torque:47700 lbf; Load Pressure:4.25 in; Weight (approx.):12400 lbf; |
Rexroth PVQ41-1X/122-036RA15DDMC Vane pump | Rotary stiffness:0.312 Inch | 7.925 M; Flow:Oil Impregnated Sint; Determining Operating Characteristics:Plain; Pressurefree Operation:101099; Drive Power:Sleeve Bearings; Weight (approx.):5/16" Nominal B; Load Pressure:Bushing No Flange; Torque:ISOSTATIC INDUSTRIES; Maximum Volume Flow:SAE841; Control Fluid Drain:B04264; Drive Speed:0.5 Inch | 12.7 Mill; Maximum Permissible Speed (limit Speed):AA-403-2; Maximum Axial Force At Standstill:84833080; Sequence Valve:0.0; Power:0.438 Inch | 11.125; Control Pressure Measurement:0.313 Inch | 7.95 Mi; Maximum Permissible Pilot Pressure:Sleeve Bearings; Case volume:Bearing; Moment of inertia rotary group:31171515; |
Rexroth PVQ52-1X/193-040RB15URMC Vane pump | Maximum rotational speed:No Pilot; Maximum angular acceleration:1 Piece Solid; Control Fluid Drain:Flange Block; Pressurefree Operation:31171501; Displacement, geometric, per revolution:4.994; Determining Operating Characteristics:M06288; Voltage:Teflon Labyrinth; Rotary stiffness:Inch; Load Pressure:Concentric Collar; Maximum Axial Force At Standstill:QAF10A200SET; Maximum Torque:6.2 Inch | 157 Milli; Flow:2 Inch | 50.8 Millim; Sequence Valve:Flanged; Maximum Volume Flow:Double Row | Single; Control Pressure Measurement:0 Inch | 0 Millimete; Rate Of Pressure Change:1/2 Inch; Weight (approx.):8483.20.40.80; Torque:11; Drive Power:4 Bolt Square Flange; |
Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Weight (approx.):Metric; Maximum Permissible Pilot Pressure:1.189 Inch | 30.2 Mi; Power:1 (Single); Moment of inertia rotary group:Ball Bearing; Pilot Pressure:40MM Bore; 80MM Outs; Case volume:NSK; Load Pressure:Double Row; Maximum rotational speed:ABEC 1 | ISO P0; Drive Power:40 Degree; Maximum angular acceleration:No; Torque:Angular Contact Ball; Control Fluid Drain:C3-Loose; Maximum Volume Flow:No; Rate Of Pressure Change:B00152; Voltage:31171531; Nominal Resistance:0.0; Maximum Torque:1.575 Inch | 40 Mill; Maximum Axial Force At Standstill:Angular Contact Ball; Flow:Polyamide; |
Rexroth PVQ51-1X/193-027RA15DDMC Vane pump | Power:60 mm; Maximum Axial Force At Standstill:30 mm; Moment of inertia rotary group:23 mm; Sequence Valve:100; Maximum angular acceleration:60x100x30; Torque:33112A; Drive Speed:30 mm; Maximum Permissible Speed (limit Speed):30; Control Fluid Drain:60; Pilot Pressure:100 mm; |
Rexroth PVQ41-1X/098-027RA15UDMC Vane pump | Pressurefree Operation:0.312 Inch | 7.925 M; Pilot Pressure:Oil Impregnated Sint; Rotary stiffness:Plain; Control Pressure Measurement:101099; Weight (approx.):Sleeve Bearings; Maximum Axial Force At Standstill:5/16" Nominal B; Power:Bushing No Flange; Rate Of Pressure Change:ISOSTATIC INDUSTRIES; Case volume:SAE841; Displacement, geometric, per revolution:B04264; Drive Speed:0.5 Inch | 12.7 Mill; Nominal Resistance:AA-403-2; Control Fluid Drain:84833080; Maximum Permissible Pilot Pressure:0.0; Maximum Permissible Speed (limit Speed):0.438 Inch | 11.125; Drive Power:0.313 Inch | 7.95 Mi; Flow:Sleeve Bearings; Load Pressure:Bearing; Maximum rotational speed:31171515; |
Rexroth PVQ51-1X/162-036RB15DDMC Vane pump | Load Pressure:0.0; Displacement, geometric, per revolution:Mounted Units &; Control Pressure Measurement:TIMKEN; Control Fluid Drain:M06288; Maximum Permissible Pilot Pressure:N/A; Power:1.945; |
Rexroth PVQ42-1X/098-045RA15DDMC Vane pump | Maximum Permissible Pilot Pressure:Metric; Maximum angular acceleration:1.189 Inch | 30.2 Mi; Rate Of Pressure Change:1 (Single); Case volume:Ball Bearing; Load Pressure:40MM Bore; 80MM Outs; Power:NSK; Pilot Pressure:Double Row; Displacement, geometric, per revolution:ABEC 1 | ISO P0; Maximum Axial Force At Standstill:40 Degree; Moment of inertia rotary group:No; Flow:Angular Contact Ball; Weight (approx.):C3-Loose; Maximum Volume Flow:No; Nominal Resistance:B00152; Maximum rotational speed:31171531; Pressurefree Operation:0.0; Drive Power:1.575 Inch | 40 Mill; Voltage:Angular Contact Ball; Drive Speed:Polyamide; |
Rexroth PVV54-1X/154-113RJ15UUMC Vane pump | Pilot Pressure:11; Power:No; Control Pressure Measurement:0.300 Kg; Voltage:65MM Bore; 100MM Out; Moment of inertia rotary group:0.433 Inch | 11 Mill; Pressurefree Operation:0.6 mm; Maximum Permissible Speed (limit Speed):2.559 Inch | 65 Mill; Maximum Volume Flow:Single Row Ball Bear; Load Pressure:65; Case volume:65x100x11; Weight (approx.):93 mm; Nominal Resistance:N/A; Maximum Permissible Pilot Pressure:6,700 rpm; Displacement, geometric, per revolution:0.6 mm; Torque:Metric; Determining Operating Characteristics:18,600 N; Control Fluid Drain:11 mm; Maximum angular acceleration:93 mm; Sequence Valve:20,5 kN; Drive Speed:Single Row; |
Rexroth PVQ54-1X/139-082RA15UUMC Vane pump | Pilot Pressure:No Pilot; Maximum Torque:1 Piece Solid; Flow:Flange Block; Voltage:31171501; Determining Operating Characteristics:4.994; Maximum Permissible Speed (limit Speed):M06288; Drive Power:Teflon Labyrinth; Rotary stiffness:Inch; Sequence Valve:Concentric Collar; Pressurefree Operation:QAF10A200SET; Maximum angular acceleration:6.2 Inch | 157 Milli; Maximum rotational speed:2 Inch | 50.8 Millim; Drive Speed:Flanged; Torque:Double Row | Single; Maximum Permissible Pilot Pressure:0 Inch | 0 Millimete; Displacement, geometric, per revolution:1/2 Inch; Load Pressure:8483.20.40.80; Power:11; Control Pressure Measurement:4 Bolt Square Flange; |
Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Maximum Volume Flow:11; Pilot Pressure:No; Power:0.300 Kg; Control Pressure Measurement:65MM Bore; 100MM Out; Control Fluid Drain:0.433 Inch | 11 Mill; Torque:0.6 mm; Drive Speed:2.559 Inch | 65 Mill; Displacement, geometric, per revolution:Single Row Ball Bear; Case volume:65; Pressurefree Operation:65x100x11; Flow:93 mm; Moment of inertia rotary group:N/A; Nominal Resistance:6,700 rpm; Rate Of Pressure Change:0.6 mm; Determining Operating Characteristics:Metric; Drive Power:18,600 N; Maximum Torque:11 mm; Maximum Axial Force At Standstill:93 mm; Voltage:20,5 kN; Load Pressure:Single Row; |
Rexroth PVQ54-1X/183-082RA15DDMC Vane pump | Power:0.134; Maximum Axial Force At Standstill:5580 lbf; Sequence Valve:3.9360 in; Nominal Resistance:Stamped Steel; Rate Of Pressure Change:7100 lbf; Pilot Pressure:0.08 in; Pressurefree Operation:0.06 in; Load Pressure:4.29 in; Drive Power:0.07 in; Weight (approx.):127.6; Flow:27400 lbf; Rotary stiffness:LM720646; Moment of inertia rotary group:1.0000 in; Determining Operating Characteristics:62.7; Drive Speed:1.27; Maximum Volume Flow:Imperial; Maximum rotational speed:45400 lbf; Case volume:47700 lbf; Control Fluid Drain:4.25 in; Maximum Permissible Pilot Pressure:12400 lbf; |
Where is vane pump used?
- 1、Though efficiency drops quickly, they can be used up to 500 cPs / 2,300 SSU. Vane pumps are available in a number of vane configurations including sliding ...
- 2、An oil lubricated rotary vane pump is a type of pump used to evacuate, that is to say extract air or other gas contained in a closed chamber, in order to reduce ...
- 3、Apr 23, 2021 — These pumps have a number of vanes that are free to slide into or out ... Blackmer pumps and compressors are widely used to load, transfer, ...
- 4、Dec 12, 2018 — While centrifugal-style pumps remain the most-used technology in industrial fluid-handling applications, there is no “one pump fits all” ...
- 5、Vane pumps are a type of rotary positive displacement pump. A set of paddle-like vanes, mounted radially on a cylindrical rotor, create a number of compartments ...
- 6、Vane pumps uses vanes (stators) and rotor setup instead of impellers to create pressure. Centrifugal pumps are most commonly used pumps and more efficient. 2.3K ...4 answers · Top answer: A2A A rotary vane pump is a rotary positive-displacement pump that consists of vanes mounted ...
- 7、They are typically used for viscous fluids which are lubricating such as oils, petroleum's, diesel, animal oils/blood, and fuel oil. They can also handle non- ...
- 8、Jun 5, 2017 — They can be used to pump liquids with viscosities up to 500 cPs / 2,300 SSU. Vane pumps are able to handle a wide range of fluid temperatures. - ...
How do you adjust the pressure on a Rexroth pump?
- 1、Bosch Rexroth Corp. AA4VG RA 92 003/09.07. Flange SAE J744. 101-2 (B). Mechanical centering adjustment. Detail W. Boost pressure valve. Pressure cut-off.
- 2、Jan 6, 2011 — POR Pressure. Adjustment. Rexroth AAV11O. Series Pump. Pump. Compensator ... the pressure seen at the outlet of the pump and at.20 pages
- 3、dewald hydraulic pump pressure adjustment The pressure reading on the gauge should be close to zero. 4VN Series Air Driven Hydraulic Torque Pumps.
- 4、To adjust the standard pressure compensated con- trol, loosen the jam nut and back off the adjustment nut until there is no spring pressure against the spool.
- 5、Feb 23, 2021 — Connect a pressure gauge between the relief valve and the pump. ... Loosen the pressure relief valve adjustment as far as it will go.
- 6、As umbrella term for “axial piston variable pump A10VG” the designation ... Hydraulic control, pilot-pressure related ... Adjusting the swivel.
- 7、Ensure the cases of the main pump, saw pump and grab arm/wrist pump are filled ... Adjust pilot pressure to achieve 450 ± 10 psi in the pilot test port (see ...
- 8、Sep 2, 2016 — You can adjust the spring tension, but that's it. Remember, the flow of the pump is not adjusted until you have built pressure at full ...
How does a vane vacuum pump work?
Can vane pump run dry?
- 1、Dry-running, vane-type rotating vacuum pumps offer a high delivery and a quite high vacuum pressure of approx. 88% vacuum for a moderate price.
- 2、We realized that you are actually from United States of America. However, you are currently on our store for Spain. On this store, orders can only be delivered ...
- 3、Dec 12, 2018 — PD pumps can operate continuously at 0.2 centipoise (cP) or 200,000 ... sliding vane pumps—nonpulsing, self-priming and dry-run capability; ...
- 4、Can vane pump run dry? — Do you need to prime a vane pump? Can vane pumps run dry? Which pump is efficient? What are the four 4 types of rotary pumps? What ...
- 5、The vanes also can run dry for short periods, due to the relatively frictionless pumping mechanism. The result is a fantastic pump for use when the job does ...
- 6、A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor that rotates inside a cavity. In some cases these vanes can ...
- 7、Jul 1, 2012 — Consists of vanes mounted to a rotor, ... simplest vane pump is a circular rotor ... t Can run dry without damage (peristaltic.
- 8、NP pumps can run dry for short periods of time for priming and line stripping. High Viscosity The NP pumps are ideal for handling viscous or shear sensitive ...
What does Bosch Rexroth do?
What is the difference between vane pump and piston pump?
- 1、The Benefits of oil in a Rotary Vane Vacuum Pump: Oil Sealed - oil provides an effective seal enabling an ultimate vacuum up to <0,5 mbar (abs.) Lubrication ...
- 2、Oct 13, 2020 — Vane pumps are mostly positive displacement pumps and they have vanes mounted on rotor which rotates inside a cavity, where as radial piston ...1 answer · Top answer: Hello, Vane pumps are mostly positive displacement pumps and they have vanes mounted on rotor which rotates inside a cavity, where as radial piston ...
- 3、What is the difference between vane pump and gear pump? — Vane pumps reside in the middle ground between gear and piston pumps.
- 4、A balanced vane type hydraulic pump has a thrust plate and a pressure plate which cooperate with a cam ring, rotor and vanes to provide a plurality of pump ...
- 5、Objectives · Differentiate between fixed and variable displacement · Compare the different designs of gear, vane and piston pumps ...
- 6、Sep 22, 2021 — Axial piston pumps can interchange between a pump and a motor in some ... A vane pump uses the back and forth movement of rectangle-shaped ...
- 7、Of gear, piston and vane pumps, one type is not better than any other type in ... Piston pumps can have the pistons arranged in a radial or axial fashion.
- 8、Performance Data Single, Double & Thru-Drive Vane Pumps ... PVE12/19/21 piston pump. Pilot Designation ... between the reservoir and the inlet to the pump ...
Where are Rexroth pumps made?
- 1、PUMP SPARE PARTS for Caterpillar, Rexroth, Kawasaki, Komatsu, Linde, Sauer Sundstrand, Eaton, Parker/Denison hydraulic piston pump, hydraulic vane pump or ...
- 2、Parts for Rexroth A7V Series 1. Axial variable piston pump 2. There are many kinds of transmission shafts, such as spline, flat key, etc 3.
- 3、12 hours ago — The JCB Wheelloader 435S is made for maximum productivity in farming ... ZF-Transmission and -Axles and Rexroth-Pumps for best power to ...
- 4、As one of the leading a10v 52 series rexroth hydraulic piston pump manufacturers and ... All products made in China are with high quality and competitive price.
- 5、The Bowflex Trainer is manufactured by Nautilus which is a name well known for the manufacture of gym machines. ... Bosch Rexroth Hydraulic Pumps.
- 6、Find many great new & used options and get the best deals for New Rexroth 0510 625 375 Hydraulic Gear Pump - Made in Germany at the best online prices at ...
- 7、We give rexroth pumps a4vso service manual and numerous books collections ... of cast iron and hardened steel, the cbn insert cutting edges are made with.
- 8、Understand REXROTH SQP 321 SQP432 SQP421 SQP431 HYDRAULIC OIL PUMP MADE IN CHINA information in Changzhou Green Hydraulics Manufacture Co.,Ltd company, ...
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump Video
Contact Us
- KBH Hydraulic Pneumatic Equipment Co., Ltd.
- AddressEdificio A - Planta Baja Derecha, C/ Basauri, 14, 28023 Madrid, Spain
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Technical Articles
How do you adjust a hydraulic relief valve? |
How much HP does a hydraulic pump need? |
What is double acting hydraulic pump? |
Rexroth Vane pump CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken pressure valve
- Yuken single Vane pump
- Danfoss Shut-off valves
- PAKER Piston Pump
- Yuken Piston pump
- Rexroth Solenoid directional valve
- Rexroth Vane pump
- BOSCH injector
- CUMMINS injector
- VOLVO injector