English- Home
- Stock Categories
- Technical Articles
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
Home>Products>Rexroth Vane pump>Rexroth PVQ2-1X055RA15DLMB Vane pump
Rexroth PVQ2-1X055RA15DLMB Vane pump
category
Rexroth Vane pump
Rexroth PVQ2-1X055RA15DLMB SPECIFICATIONS
Rexroth Vane pump are a few KBH Hydraulic Pneumatic Equipment Co., Ltd. brands you will find in our ASAHI BEARINGS Manufacturer Name N/A Minimum Buy Quantity inventory. Find Rexroth PVQ2-1X055RA15DLMB Vane pump to see what's in stock!
- Rexroth
PVQ2-1X055RA15DLMB
- 8483.20.40.80
- QAF10A200SET
- No Pilot
- ISO Class 0
- Sleeve Bearings
- 1.0000 in
- 11 mm
- Eccentric Collar
-
KBH Hydraulic Pneumatic Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth PVQ2-1X055RA15DLMB Vane pumpCompare similar products
- 0.433 Inch | 11 Mill
- 4.29 in
- 1.575 Inch | 40 Mill
- 1.945
- 1.945
- 1.26 Inch | 32 Milli
- 62.7
- Imperial
- Polyamide
- Stamped Steel
- Cast Steel
- No
- Imperial
- 27400 lbf
- Polyamide
- 1 (Single)
- 9 mm
Rexroth PVQ2-1X055RA15DLMB Rexroth PVQ2-1X055RA15DLMB Vane pumpCustomers who bought this item also bought
##Parts Table 1##Rexroth PVQ2-1X055RA15DLMB Vane pump | ||||||||
|---|---|---|---|---|---|---|---|---|
| Spacer | 35 mm | 15 mm | 11 mm | 0,092 Kg | ||||
| Regulator | 160 mm | 65 mm | 37 mm | 35 mm | ||||
| Gear Pump | 3.543 Inch | 90 Millimeter | 2.165 Inch | 55 Millimeter | 1.417 Inch | 36 Millimeter | 0.39 | ||||
| Block Cylinder | 2 in | 60 | Two Metal Shields | 71.7 | ||||
| Swash Plate Assy | 170 mm | Duplex-Universal | 20000 | 0.208 | ||||
| Central Shaft | Open | 110mm | Phenolic | - | ||||
| Set Plate | 200x280x60 | 8,7 kN | 180 mm | 0.6 | ||||
| Snap Ring | 2 in | 1-1/2 in | 80mm | 2 in | ||||
| Guide Ball | 110mm | 60mm | 22mm | 15000 r/min | ||||
| Bearings | 250mm | 150mm | 80mm | 35 mm | ||||
| Saddle Bearing | 65 | Steel | 65 mm | 110mm | ||||
| Ball Guide | 280 mm | 200 mm | 60 mm | 1 Rib Outer Ring | ||||
| Back Plate | 170 mm | 95 mm | 43 mm | 9300 | ||||
| Seal Kit For Hyd Pump | 11 | Bearing | 55MM Bore; 90MM Outside Diameter; 36MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring Rac | 0.020 Kilogram | ||||
| Rexroth PVQ52-1X/193-055RB15UUMC Vane pump | Case volume:0.0; Drive Speed:Mounted Units &; Displacement, geometric, per revolution:TIMKEN; Weight (approx.):M06288; Control Pressure Measurement:N/A; Moment of inertia rotary group:1.945; |
| Rexroth PVQ51-1X/193-027RA15DDMC Vane pump | Maximum angular acceleration:Metric; Moment of inertia rotary group:1.189 Inch | 30.2 Mi; Maximum Permissible Pilot Pressure:1 (Single); Displacement, geometric, per revolution:Ball Bearing; Drive Power:40MM Bore; 80MM Outs; Maximum rotational speed:NSK; Voltage:Double Row; Rate Of Pressure Change:ABEC 1 | ISO P0; Control Pressure Measurement:40 Degree; Pressurefree Operation:No; Load Pressure:Angular Contact Ball; Weight (approx.):C3-Loose; Case volume:No; Maximum Axial Force At Standstill:B00152; Determining Operating Characteristics:31171531; Drive Speed:0.0; Maximum Torque:1.575 Inch | 40 Mill; Pilot Pressure:Angular Contact Ball; Control Fluid Drain:Polyamide; |
| Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Flow:No Pilot; Maximum Torque:1 Piece Solid; Moment of inertia rotary group:Flange Block; Pilot Pressure:31171501; Control Fluid Drain:4.994; Control Pressure Measurement:M06288; Torque:Teflon Labyrinth; Sequence Valve:Inch; Weight (approx.):Concentric Collar; Maximum Permissible Speed (limit Speed):QAF10A200SET; Pressurefree Operation:6.2 Inch | 157 Milli; Displacement, geometric, per revolution:2 Inch | 50.8 Millim; Load Pressure:Flanged; Maximum Volume Flow:Double Row | Single; Determining Operating Characteristics:0 Inch | 0 Millimete; Maximum rotational speed:1/2 Inch; Case volume:8483.20.40.80; Rotary stiffness:11; Rate Of Pressure Change:4 Bolt Square Flange; |
| Rexroth PVQ42-1X/098-045RA15DDMC Vane pump | Maximum Axial Force At Standstill:Double Row; Torque:1 Piece Solid; Load Pressure:TIMKEN; Rate Of Pressure Change:Eccentric Collar; Pilot Pressure:19.125 Inch | 485.77; Drive Speed:17.375 Inch | 441.32; Displacement, geometric, per revolution:Yes; Control Fluid Drain:1 Inch; Pressurefree Operation:23230; Drive Power:31171511; Nominal Resistance:0.0; Rotary stiffness:Inch; Sequence Valve:Pillow Block; Case volume:6.688 Inch | 169.875; Voltage:4 Bolt Pillow Block; Power:4; Determining Operating Characteristics:Pillow Block Bearing; Maximum angular acceleration:18.3 Inch | 464.8 Mi; Moment of inertia rotary group:Double Lip Viton; |
| Rexroth PVQ41-1X/098-027RA15UDMC Vane pump | Control Fluid Drain:9 mm; Torque:No; Voltage:9 mm; Load Pressure:ISO Class 0; Rotary stiffness:-40 to 120 ºC; Nominal Resistance:Single Row Ball Bear; Displacement, geometric, per revolution:High Carbon Chrome S; Maximum Permissible Pilot Pressure:Round; Maximum rotational speed:0.066; Maximum Permissible Speed (limit Speed):0.03; Case volume:Single Row Ball Bear; Pressurefree Operation:B00308; Flow:No; Determining Operating Characteristics:1.26 Inch | 32 Milli; Sequence Valve:8.0; Power:NTN; Rate Of Pressure Change:0.354 Inch | 9 Milli; Weight (approx.):N/A; Drive Power:32 mm; |
| Rexroth PVQ41-1X/122-036RA15DDMC Vane pump | Pressurefree Operation:Bearing Steel; Pilot Pressure:2.7500 in; Flow:Double V-Lock Collar; Weight (approx.):883450171113; Maximum Torque:Cast Steel; Drive Speed:Solid Pillow Block; Displacement, geometric, per revolution:Click here; Control Fluid Drain:Powder Coat; Maximum Axial Force At Standstill:Labyrnith non-contac; Case volume:4.0900 in; Sequence Valve:Lubrication Fitting; Nominal Resistance:0.6250 in; Maximum Permissible Pilot Pressure:7.7550 in; Maximum Permissible Speed (limit Speed):Heavy Duty; Maximum rotational speed:Open; Maximum Volume Flow:Round; Voltage:1.3800 in; Rate Of Pressure Change:2.9000 in; Maximum angular acceleration:Spherical Roller; Load Pressure:2.5000 in; |
| Rexroth PVQ54-1X/139-082RA15UUMC Vane pump | Control Fluid Drain:Bearing Steel; Case volume:2.7500 in; Determining Operating Characteristics:Double V-Lock Collar; Maximum Volume Flow:883450171113; Maximum angular acceleration:Cast Steel; Displacement, geometric, per revolution:Solid Pillow Block; Torque:Click here; Maximum Permissible Pilot Pressure:Powder Coat; Control Pressure Measurement:Labyrnith non-contac; Pressurefree Operation:4.0900 in; Nominal Resistance:Lubrication Fitting; Moment of inertia rotary group:0.6250 in; Power:7.7550 in; Voltage:Heavy Duty; Pilot Pressure:Open; Maximum Permissible Speed (limit Speed):Round; Maximum rotational speed:1.3800 in; Drive Power:2.9000 in; Sequence Valve:Spherical Roller; Drive Speed:2.5000 in; |
| Rexroth PVQ52-1X/193-040RB15URMC Vane pump | Control Pressure Measurement:Metric; Nominal Resistance:1.189 Inch | 30.2 Mi; Maximum angular acceleration:1 (Single); Determining Operating Characteristics:Ball Bearing; Rotary stiffness:40MM Bore; 80MM Outs; Maximum rotational speed:NSK; Displacement, geometric, per revolution:Double Row; Sequence Valve:ABEC 1 | ISO P0; Maximum Axial Force At Standstill:40 Degree; Maximum Permissible Pilot Pressure:No; Maximum Permissible Speed (limit Speed):Angular Contact Ball; Power:C3-Loose; Flow:No; Drive Speed:B00152; Voltage:31171531; Moment of inertia rotary group:0.0; Pilot Pressure:1.575 Inch | 40 Mill; Control Fluid Drain:Angular Contact Ball; Rate Of Pressure Change:Polyamide; |
| Rexroth PVV54-1X/154-113RJ15UUMC Vane pump | Drive Power:Double Row; Pressurefree Operation:1 Piece Solid; Moment of inertia rotary group:TIMKEN; Load Pressure:Eccentric Collar; Sequence Valve:19.125 Inch | 485.77; Control Pressure Measurement:17.375 Inch | 441.32; Rotary stiffness:Yes; Maximum rotational speed:1 Inch; Drive Speed:23230; Pilot Pressure:31171511; Maximum Volume Flow:0.0; Power:Inch; Rate Of Pressure Change:Pillow Block; Flow:6.688 Inch | 169.875; Maximum Permissible Speed (limit Speed):4 Bolt Pillow Block; Maximum Torque:4; Displacement, geometric, per revolution:Pillow Block Bearing; Voltage:18.3 Inch | 464.8 Mi; Maximum angular acceleration:Double Lip Viton; |
| Rexroth PVQ54-1X/183-082RA15DDMC Vane pump | Displacement, geometric, per revolution:9 mm; Power:No; Control Fluid Drain:9 mm; Maximum Torque:ISO Class 0; Maximum Axial Force At Standstill:-40 to 120 ºC; Maximum rotational speed:Single Row Ball Bear; Maximum angular acceleration:High Carbon Chrome S; Moment of inertia rotary group:Round; Maximum Volume Flow:0.066; Pressurefree Operation:0.03; Maximum Permissible Pilot Pressure:Single Row Ball Bear; Sequence Valve:B00308; Weight (approx.):No; Rate Of Pressure Change:1.26 Inch | 32 Milli; Rotary stiffness:8.0; Drive Speed:NTN; Voltage:0.354 Inch | 9 Milli; Case volume:N/A; Drive Power:32 mm; |
| Rexroth PVQ21-1X/068-027RA15LUMB Vane pump | Maximum angular acceleration:0.134; Load Pressure:5580 lbf; Moment of inertia rotary group:3.9360 in; Flow:Stamped Steel; Maximum rotational speed:7100 lbf; Case volume:0.08 in; Displacement, geometric, per revolution:0.06 in; Maximum Torque:4.29 in; Control Pressure Measurement:0.07 in; Maximum Axial Force At Standstill:127.6; Rotary stiffness:27400 lbf; Voltage:LM720646; Drive Speed:1.0000 in; Power:62.7; Rate Of Pressure Change:1.27; Maximum Permissible Speed (limit Speed):Imperial; Pressurefree Operation:45400 lbf; Maximum Permissible Pilot Pressure:47700 lbf; Torque:4.25 in; Pilot Pressure:12400 lbf; |
| Rexroth PVQ51-1X/162-036RB15DDMC Vane pump | Maximum rotational speed:0.0; Flow:Mounted Units &; Load Pressure:TIMKEN; Rotary stiffness:M06288; Maximum Volume Flow:N/A; Maximum angular acceleration:1.945; |
Where is vane pump used?
- 1、Results 1 - 24 of 68 — Rotary Vane Pumps & Motors. A rotary vane pump is used to clean and transfer materials for industrial vacuum systems. Show filters.
- 2、Sliding Vane Pumps are positive displacement pumps. ... Cavitation Line. Rotary vane pumps used for high vapor pressure liquids ...
- 3、Rotary vane pumps produce hydraulic power for automatic transmissions. Located in the cover of the transmission, they pull oil at low pressure from a sump ...
- 4、Jan 9, 2018 — A hydraulic vane pump is a device used to pump hydraulic fluid from a reservoir into a hydraulic motor or motors. The vane pump is driven by ...
- 5、Rotary vane pumps are common in industrial and lab settings, and are used to pump gas, oil, water and other, low-viscosity fluids.
- 6、Therefore it is often used for pumping strong oxidants (halogenides, nitrogen oxides, etc.). As this oil type must not be mixed with mineral oils, a pump ...
- 7、Get the best deals on Rotary Vane Pumps when you shop the largest online selection at eBay.com. Free shipping on many items | Browse your favorite brands ...
- 8、A vane pump is a positive displacement pump that delivers a constant flow rate under different pressure conditions. It is a self-priming pump.Jul 22, 2021 · Uploaded by TS7 StudyZoneWorking of Vane Pump · Components of Vane Pump · Types Of Vane Pumps
Where are Rexroth pumps made?
- 1、Dec 7, 2014 — Opened in 1989, the facility was originally made up of a single 250,000 sq. ft. building and specialized in manufacturing hydraulic pumps.
- 2、NEW REXROTH AXIAL Piston Pump L A10VO28DRG / 31R R902401111 Made in USA - $400.00. FOR SALE! New Rexroth Axial Piston Pump L A10VO28DRG/31R-PSC61N00 -S1062 ...
- 3、The PVV hydraulic pumps are fixed displacement vane pumps. The rotori s fitted onte the plines of the drive shaft which rotates inside the stator ring.
- 4、Bosch Rexroth AG is an engineering firm based in Lohr am Main in Germany. ... This article may have been created or edited in return for undisclosed payments ...
- 5、66-74 Mopar 340 383 440 Six Pack Cuda Fuel Pump 5/16 Lower Fue eBay Motors ... Not Country 340 been Rexroth seller's Lower Condition: Used: The any 383 Fuel ...
- 6、Parts for Rexroth A7V Series 1. Axial variable piston pump 2. There are many kinds of transmission shafts, such as spline, flat key, etc 3.
- 7、14 hours ago — The organiser has made sustainability a principle and taken a series of measures to effectively conserve resources.
- 8、Mar 3, 2022 — Moreover, the rising construction activities in developing countries, on account of heavy investments being made in the development of ...
How do you adjust the pressure on a Rexroth pump?
- 1、The system pressure should be set as low as possible to prevent unnecessary fluid heating. In some cases, this setting can be higher than the necessary static ...
- 2、Feb 23, 2008 — The Rexroth tech manual does't give any kind of procedure for adjusting the pressure controls and we had some well intentioned but ...
- 3、Jul 13, 2018 — But the load sense system is also matching the pressure issues, the pressure requirements in the hydraulic cylinder, and producing a pump ...
- 4、A load sense pump has the ability to vary its output flow and the system pressure to just match the demands at the hydraulic actuator.
- 5、Hydraulic control HD, pilot-pressure related. (see data sheet 92080). Stepless adjustment of the pump displacement according to the pilot pressure.
- 6、▷ Changes to the factory settings may only be made by Bosch Rexroth specialists. ▷ In addition, a pressure relief valve is required in the hydraulic system as ...
- 7、High Pressure Hydraulic Compensated Variable Displacement Oil Pump ... of the flow and pressure adjustment well, the pump to automatically change according ...
- 8、Oct 1, 2017 — Hello gentlemen I am wondering if any of you have any thoughts on how to set the pressure on the regulators on a 4300c linkbelt I am getting ...20 posts · Check the flow of the pilot pump. I have been told that machines of this era the pump wears, ...
Can vane pump run dry?
- 1、Jul 1, 2012 — Consists of vanes mounted to a rotor, ... simplest vane pump is a circular rotor ... t Can run dry without damage (peristaltic.
- 2、Aug 3, 2021 — Sliding vane pumps offer tank truck operators better functionality, ... If the pump runs dry, the metal-on-metal contact will cause galling, ...
- 3、Vane pumps self-compensate for wear meaning they can maintain peak ... VP do not have metal to metal contact allowing pump to prime from dry but also strip ...
- 4、A positive displacement pump works by using a screw, a blade, a vane, a lobe, ... Certain Positive Displacement Pumps can run dry i.e Air Operated Diaphragm ...
- 5、Dec 16, 2018 — This capability allows the PD pump to draw a suction vacuum and compress air into the discharge piping, all while dry running. This enables the ...
- 6、Vane pumps can handle thin liquids at relatively high pressures and can run dry for short periods. They are also reversible so can be used to load and ...
- 7、While there are dry running vacuum pumps that do not require any oil, composites industry vacuum pumps are typically of the oil flooded rotary vane type.
- 8、This type of pump has better dry priming capability than other PD pumps. Vane pumps can run dry, but are subject to vane wear. Abrasive applications require the ...
What does Bosch Rexroth do?
What is the difference between vane pump and piston pump?
- 1、As the vanes move past the suction port of the pump, a vacuum is created. This vacuum is what draws fluid into the pumping chamber. The fluid then moves between ...
- 2、A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a ... What is a difference between vane pump and radial piston pump?Dec 9, 2021 · Uploaded by Viking Pump
- 3、Note that modern pumps have an area contact between rotor and stator (and not a line contact). 1. pump housing 2. rotor 3. vanes 4. spring. A rotary vane pump ...
- 4、Jun 4, 2018 — Vane pumps reside in the middle ground between gear and piston pumps. They're more efficient than gear pumps, but less so than piston pumps.
- 5、Vane pumps fall about midway between economical gear pumps and expensive piston pumps. Finally, while rotary, positive-displacement pumps are capable of pumping ...
- 6、The vanes create segmented chambers within the pump head, partitioning the pump head between the rotor and outer casing which enable the vane pump to be self- ...
- 7、There are two basic variations of hydraulic piston pumps: axial and radial pistons. The essential difference between the two is the placement of the pistons ...
- 8、Oct 7, 2020 — There is a vane which slides in a slot in the shaft, and is the full height of the pump chamber. Pump inlet is in the portion of the swept area where the piece ...2 answers · 1 vote: Exactly what it says on the tin. In a vane pump, you have a shaft rotating in a circular ...What is the difference between variable displacement ...1 answerMay 8, 2019What is the difference between a vane pump and a ...2 answersApr 29, 2021What is the difference between a vane pump and a ...2 answers
How does a vane vacuum pump work?
Rexroth PVQ2-1X055RA15DLMB Vane pump Video
Rexroth PVQ21-1X060-018RA15DLMB Vane Pumps shop for
Rexroth PVQ21-1X060-018RA15DLMB Vane Pumps, and Other Details of Rexroth ... Vane Pumps · Rexroth PVQ2-1X055RA15DLMB Vane Pumps
Fixed displacement vane pumps Types PVV and PVQ
by Bosch Rexroth AG, Industrial Hydraulics, D-97813 Lohr am Main. All rights reserved. No part of this ... Unit dimensions: • PVV / PVQ 1. 9. • PVV / PVQ 2; 4; 5
Bosch Rexroth PVQ2-1X/060RA15UMB Vane pump - Mercateo
Bosch Rexroth PVQ2-1X/060RA15UMB Vane pump (R900954519) in 'Industrial products' > 'Industrial products': Order best price offers online for Bosch
Rexroth Valve: China Suppliers - 2351687 - Tradesparq
Rexroth Valve- Find detailed information about Gate valves from HENAN GENERAL INDUSTRY CO., LIMITED. You may also find other Gate valves suppliers
Bosch Rexroth for sale – Bosch Rexroth manufacturer from
Quality Bosch Rexroth for sale - buy cheap Bosch Rexroth from Bosch Rexroth manufacturers & Bosch Rexroth supplier of China (107987148)
Fixed displacement vane pumps - Robucon
www.boschrexroth.com/spc. Fixed displacement vane ... PVV / PVQ 2; 4; 5. 12. • PVV / PVQ 2…K.. 13 ... Bosch Rexroth AG Hydraulics. PVV; PVQ RE 10335/
Contact Us
- KBH Hydraulic Pneumatic Equipment Co., Ltd.
- AddressEdificio A - Planta Baja Derecha, C/ Basauri, 14, 28023 Madrid, Spain
Rexroth PVQ2-1X055RA15DLMB Technical Articles
| How do you adjust a hydraulic relief valve? |
| How much HP does a hydraulic pump need? |
| What is double acting hydraulic pump? |
Rexroth Vane pump CATEGORIES
- Rexroth THROTTLE VALVE
- Rexroth Piston Pump
- Rexroth check valve
- DENISON vane pump
- Yuken Double Vane pump
- Rexroth PRESSURE RELIEF VALVE
- Yuken pressure valve
- Yuken single Vane pump
- Danfoss Shut-off valves
- PAKER Piston Pump
- Yuken Piston pump
- Rexroth Solenoid directional valve
- Rexroth Vane pump
- BOSCH injector
- CUMMINS injector
- VOLVO injector
Rexroth PVV54-1X/154-113RJ15UUMC Vane pump
Rexroth PVQ54-1X/139-082RA15UUMC Vane pump
Rexroth PVQ54-1X/183-082RA15DDMC Vane pump
Rexroth PVQ52-1X/193-055RB15UUMC Vane pump
Rexroth PVQ52-1X/193-040RB15URMC Vane pump